SHOES CARE GUIDE

Step 1 - Cleaning and conditioning

Start by removing all dirt and sand from your shoes with a brush or moist cloth. Apply Saphir Médaille d'Or Renovateur by using an applicator cloth. Make sure to distribute the cream evenly over the entirety of the shoe (except the soles). Allow the cream to soak into the leather for at least 5 minutes before brushing/buffing off any excell Renovateur cream. Renovateur will nourish the leather deeply. Let dry for five minutes and brush out using a horsehair brush.


Your shoes are now clean and nourished. At step 2 we will explain how to shine, recolour and give the basic level protection to your shoes.

Step 2 - Shining and Recolouring

Apply some Saphir Médaille d'Or Pommadier shoe cream by using an applicator cloth or brush to evenly distribute the cream over the shoes. Allow the cream to be absorbed by the leather for about five minutes. Saphir Médaille d'Or Pommadier cream will nourish, recolour, protect and give a soft shine to your leather shoes. Brush your shoes with a horsehair brush to create a nice shine.


Tip: Depending on the damages or fading of the colour of your shoes you can apply+shine Pommadier cream up to three times to get better coverage.


After finishing with this step your shoes will be recoloured and have a nice matte shine. At the third and final step we will discuss how you can waterproof your shoes and give them a high shine finish.

Step 3 - Waterproofing and High Gloss Finish

Use Saphir Médaille d'Or Pate de Luxe to create a waterproofing high gloss finish on your shoes. Begin by applying a very thin layer of Saphir Medaille d'Or Pate de Luxe shoe wax. Be sure to spread the wax over the shoes as thin as possible. Afterwards, shine your shoes with preferrably a cotton cloth (or a brush) to shine up the wax polish on the shoes. For new shoes or shoes that haven't been shined recently it can be beneficial to repeat this step once more after you are done.

Recommended Products